LIST OF  PUBLICATIONS OF INSTRUMENTATION ENGINEERING DEPARTMENT 

 

N. Baruah, L. Phukan  “Fuzzy Logic based Speed Control of an Induction Motor using Indirect Vector Control Method” ; International Journal of Emerging Trends in Science & Technology; Vol 02, Issue of January, 2015

N. Baruah, L. Phukan  “Design of Fuzzy Logic Controller for Performance Optimization of Induction Motor using Indirect Vector Control Method”; International Journal of Electrical, Electronics and Data Communication; vol. 2, Issue 12,2015

N. Baruah, D. Hazarika, K C Sarma: “Static Voltage Stability Indication in a Power System using ANN” National Conference on Computational Intelligence and Signal Processing Don Bosco University; 2011

N. Baruah, D.Hazarika,  K Khaparde,K C Sarma: “Monitoring of Voltage Stability Condition in a Power System using the Measurement of System Variables” Proceedings of  International Conference on Electrical Power and Energy Systems; N.I.T. Bhopal; 2010

D.Hazarika, K. C. Sarma, N. Baruah “Method for Determining Load Margin of a Bus in terms of its Voltage Collapse Limit in an Interconnected Power System” Proceedings of Conference 15th National Power System Conference; I.I.T. Bombay; 2008

N. Baruah, P. B. Dutta Gupta, P.K. Kulkarni: “Artificial Heart Assist System and its Drive Circuit Controlled by a Microprocessor” Proceedings of conference  the 13th National Systems Conference, I.I.T. Kharagpur, 1989

A. Saikia1, C. Mahanta2. “Active Front Steering Using PID based Sliding Mode Control”, International Conference on Recent Trends in Industrial and Mechanical Engineering (ICTIME 2016), 4-6 February’ 2016, MANIT, Bhopal.

A. Saikia1, C. Mahanta2. “Integrated Control of Active Front Steer Angle andDirect Yaw Moment Using Second Order SlidingMode Technique”, 2016 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016), 4-6 July’ 2016, Delhi Technological University, Delhi.

A. Saikia1, C. Mahanta2. “Lateral Stability Enhancement of Vehicles Using Adaptive Sliding Mode Based Active FrontSteering and Direct Yaw Moment Control”, INDICON 2016, 16-18 December’ 2016, IISC Bangalore.

A. Saikia1, C. Mahanta2. “Vehicle Stability Enhancement Using Sliding Mode Based Active Front Steering and Direct Yaw Moment Control”, Indian Control Conference (ICC 2017), 4-6 Jan’ 2017, IIT Guwahati.

W. Saikia1, A. Saikia2. “Magnetic Levitation System Control Strategy Based on Backstepping Technique to Design Sliding Mode Controller”, ICEPE 2018, 1st&  3rd,  June

K. P. Ghatak, S. Bhattacharya, H. Saikia,  D. Baruah,  A. Saikia,  K.M. Singh,  A. Ali, S.N. Mitra, P.K. Bose, A. Sinha.  “The Debye Screening Length in Ultrathin Films of Nonlinear Optical, Optoelectronic and Related Materials: Simplified Theory and Suggestion for Experimental Determination”, Journal of Computational and Theoretical Nano science 3(5):727-751 · October 2006.

T. Rasul1M. Pathak2,Control of nonlinear chemical process using sliding mode control, 2016 1st International Conference on Power Electronics, Intelligent Control and Energy Systems  (ICPEICES 2016), 4- 6 July’ 2016, Delhi Technological University, Delhi.

M. Pathak1, M. Buragohain2, Finite Time Continuous Terminal Sliding Mode Control for

Trajectory Tracking of Robotic Manipulator, Journal of Basic and Applied Engineering Research

(JBAER),Vol 3, Issue 13, 2016, pp. 1152-1158, KrishiSanskriti Publications.

T Rasul1, M. Pathak2,Robust Control of Thermal Mixing Process using Sliding Mode Control, Advanced Research in Electrical and Electronic Engineering (AREEE), Vol 3, Issue 5, 2016, pp. 349-353, KrishiSanskriti Publications.

S. Biswas and A. Gogoi,“Design Issues of Piezoresistive MEMS Accelerometer for an Application Specific Medical Diagnostic System”, J. of IETE Tech. review, vol. 33, No.1, pp.11-16, 2016.

S. Biswas and A.K.Gogoi,“Design and analysis of FEM based MEMS accelerometer for detection ofpostural tremor in thyrotoxicosis”, In: Proceeding of International Conference on Advanced Electronics System (ICAES), IEEE Computer Society, pp. 113-116, Sept., 2013.

S. Biswas, A.K.Gogoi, “Design and simulation of piezoresistive MEMS accelerometer for the detectionof pathological tremor”, In: Proceeding of IEEE SoutheastCON, pp. 1-5. Lexington, KY, Mar 2014.

S. Biswas, R.K. Sharma, ARC, “High voltage analysis of compact electron gun of the miniature helixTWT for broadband microwave power module”, In: Proceeding of ICMARS, Jodhpur, Dec., 15-19, 2003.

S. Biswas, R.K Sharma, ARC, “ Design and Analysis of electron gun of miniature helix TWT for X Kuband microwave power module”, In: Proceeding of CODEC 2004, Kolkata.

S. Biswas, A.K.Gogoi, “Noise Performance and Design Optimization of a PiezoresistiveMEMSAccelerometer Used in a Strapdown Medical Diagnostic System”, in proc. of Advanced Computing and Communication Technologies, Advances in Intelligent Systems and Computing, Singapore: Springer, vol. 562, pp. 287-296, Jan., 2018.

S. Biswas, A.K. Gogoi,“Design of a PiezoresistiveMicroaccelerometer with High Sensitivity for MedicalDiagnostic”, in Advances in Systems, Control and Automation, Lecture Notes in Electrical Engineering, Singapore: Springer vol. 442, pp. 481-490, 2018.

AWARDS:

Best Poster presentation in ICEE 2014 held at IISC Bangalore (Dec., 3-6), Sonali Biswas and Anup Kumar Gogoi, Indian Institute of Technology, Guwahati, India.

Design issues of Piezoresistive MEMS accelerometer for an application specific medical diagnostic system’’.

P. Patowary and N. K. Goyal security Assessment of Bus Voltages and electric power  system, 2nd Int. Conf. on Power and Energy Systems (ICEPES 2012), IPCSIT, Vol. 56, pp 35-40. Nov 17-18,2012.

P. Patowary and N. K. Goyal Security Assessment of an Electric Power system, Reliability and Maintenance Symposium 2013. The 6th Annual RAMS Rosen Shingle Creek Resort, Oriando, Florida USA.

P. Patowary and N. K. Goyal Security Monitoring and Assessment of an Electric Power system. International journal of performability Engineering Vol. 10 No 3 pp. 273-280 may 2014.

P. Patowary and N.K. Goyal Overload Security and Risk Assessment of Overhead lines, proceeding of 6th power India International Conference (PIICON2014), Delhi IEEE, pp-6,5-7 Dec.,2014.

P. Patowary and N. K. Goyal, Dynamic Thermal Rating and allowable operating time under transient condition, proceeding of the 18thNational Power Systems Conference (NPSC 2014) Guwahati IEEE pp 1-6, Dec 18-20-2014.

M. Baruah and P. Patowary Classification of Faults of Transmission lines using EMTP and Wavelet Multiresolution Analysis, journal of electrical and electrical engineering (IOSR-IEEE) vol. 9  No 5, 79-86, Sept.,2014.

K. S. Barman and P. Patowari, A phase shifted control base DATATCOM mitigation of voltage sag and Voltage Swell in Distribution System, Int. Journal Engineering Research and Technology (IJERT), Vol. 6No 4 April,2017.

Participant 1st International Conference on Accessibility to Digital world, Assam Engineering College. 16th -18thDec.,2014.

T. K. Basu, R. B. Mishra & P. Patowary; A. New Appproach To Probabilistic Load  Flow, IIT Kharagpur 27th-29th Dec.

M. D. Sharma, N. Phukan, Nayan M. Kakoty, D. Sonowal, Hand visualization for Grasping Operations. Accepted for the International Conference on Advances in Robotics, IIT Delhi, 28thJune – 2ndJuly, 2017. ACM Publication.

A. K. Bordoloi, Md. F. Islam, J. Zaman, N. Phukan andN. M. Kakoty, A. Floor Cleaning Robot for Domestic Environments. Accepted for the International Conference on Adavances in Robotics, IIT Delhi, 28th June – 2ndJuly, 2017. ACM Publication.

N. Phukan and N. M. Kakoty, Sample Entropy based Selection of Wavelet Decomposition Level for Finger Movement Recognition using EMG. Accepted at International Conference of Advanced Computing and Intelligent Engineering, 2017, Ajmer, 23rd-25th November, 2017. To be published as book chapter in Advances in Intelligent Systems and Computing Book Series in Springer.

Angana Saikia, Nayan M. Kakoty, Nabasmita Phukan, Malarvili Balakrishnan, Nitin Sahai, Sudip Paul and Dinesh Bhatia. Combination of EMG Features and Stability Index for Finger Movements Recognition. Procedia Computer Science, Volume 133, 2018, Pages 92-98, Elsevier.

AWARDS:

Best Paper in ADVANCED COMPUTING TRACK for the paper, “Sample Entropy based Selection of Wavelet Decomposition Level for Finger Movement Recognition using EMGin ICACIE 2017.

U. M. Nath, S. Datta, and C. Dey, ‘Centralized auto-tuned IMC-PI controllers for a real time coupled tank process.’ International Journal of Science, Technology and Management, Vol. 4, Special Issue No. 1, pp. 1094-1102, 2015.

U. M. Nath, C. Dey, R. K. Mudi, ‘Fuzzy rule-based auto-tuned internal model controller for real-time experimentation on temperature and level processes’ Int. J. Automation and Control (ESCI journal), accepted.

U. M. Nath, S. Datta, and C. Dey, ‘Centralized Auto-tuned IMC-PI Controllers for Industrial Coupled Tank Process with Stability Analysis.’ IEEE 2nd International Conference on Recent Trends in Information Systems (ReTIS), pp. 296-301, Kolkata 2015.

S. Datta, U. M. Nath, and C. Dey, ‘Design and Implementation of Decentralized IMC-PI Controllers for Real Time Coupled Tank Process.’ Michael Faraday IET International Summit: MFIIS-2015, pp. 93-98, Kolkata, 2015.

U. M. Nath, C. Dey, R. K. Mudi, ‘Fuzzy-based Adaptive IMC-PI Controller for Real-time Application on Level Control Loop’ Springer –5th International Conference on Frontiers of Intelligent Computing: Theory and applications (FICTA),pp. 387-395, Bhubaneswar, 2016.

Book chapter: Advances in Intelligent Systems and Computing.

U. M. Nath, C. Dey, R. K. Mudi, ‘Fuzzy-tuned SIMC Controller for Level Control Loop’ Springer- International Conference on Industry Interactive Innovations in Science, Engineering and Technology (I3SET), pp. 239-245, Kalyani, 2016.

Book chapter: Lecture Notes in Networks and Systems.

U. M. Nath, C. Dey, R. K. Mudi, ‘Model Identification of Coupled-Tank System – MIMO Process’ IEEE 2nd International Conference on Electrical, Computer and Communication Technologies (ICECCT), pp. 284-289, Coimbatore, 2017.

U. M. Nath, C. Dey, R. K. Mudi, ‘Design of Modified Model-based Adaptive Control System for FOPDT Process’ IEEE 4th International Conference on Power, Control and Embedded Systems (ICPCES), pp. 1-5, Allahabad, 2017.

R. Sengupta, U. M. Nath, C. Dey, ‘Design and Performance Analysis of a Modified MRAC for Second-order Processes’ IEEE 4th International Conference on Power, Control and Embedded Systems (ICPCES), pp. 1-5, Allahabad, 2017.

U. M. Nath, C. Dey, R. K. Mudi, ‘Fuzzy-based Auto-tuned IMC-PID Controller for Real-time Level Control Process’ Springer- Computational Intelligence, Communications and Business Analytics (CICBA – 2017), pp. 372-381, Kolkata, 2017.

Book chapter: Communication in Computer and Information science.

P. J. Hazarika, N. Baruah; “Linearization Of Semi-Conductor Type Gas Sensor Characteristics Using Lab-View” Accepted For National Conference “Advancements & Future Trends in Electrical & Electronics Engineering” on 18th-19th March, 2016 at AIET Campus, Jaipur ; 18th March 2016.

P. J. HazarikaImplementation of smart safety helmet for coal mine workers” seminar delivered at International conference on power electronics intelligent control and energy system (ICPEICES) – 2-5th June 2016. IEEE publication.

P. J. Hazarika & N. Deka “Smart Auto Calibrator”“International Journal of ElectricalEngineering& Technology (IJEET), Volume 8, Issue 2, March-April, 2017, pp.13-17; ISSN Print: 0976 – 6545 and ISSN, Online: 0976 – 6553; Journal Impact Factor (2016): 8.1891

P. J. Hazarika &N. Deka“Liquid level control using fuzzy logic in LabVIEW with Arduino”; “International  Journal of advance research Ideas and innovations in technology”, Volume -3,  issue 1, Jan-Feb 2017,ISSN -2454-132X, Impact factor:4.295

P. J. Hazarika & N. Deka “ANN based Electronic Nose using LabVIEW and Arduino”, International Journal of Engineering Science and Computing, Volume 8, Issue-8, April 2018, ISSN 2250-1371. Impact factor: 5.611